Cable Pulling Grip

Product Description

SINGLE EYE CABLE PULLING GRIPS Part No Cable Diameter in mm Material Weave Working Load Limit in Kg Grip Length in mm Total Length in mm AEP 11/1 06 11 Galvanized Double 200 500 600 AEP 16/1 11 16 Galvanized Double 300 500 600 AEP 21/1 16 21 Galvanized Double 650 500 600 AEP 26/1 21 26 Galvanized Double 670 500 600 AEP 31/1 26 31 Galvanized Double 800 1000 1100 AEP 41/1 31 41 Galvanized Double 1000 1000 1100 AEP 51/1 41 51 Galvanized Double 1500 1000 1100 AEP 61/1 51 61 Galvanized Double 1600 1400 1500 AEP 71/1 61 71 Galvanized Double 2000 1400 1500 AEP 81/1 71 81 Galvanized Double 2800 1400 1500 AEP 101/1 81 101 Galvanized Double 3500 1400 1500 AEP 121/1 101 -121 Galvanized Double 3550 1400 1500 AEP 151/1 121 151 Galvanized Double 4200 1400 1500 Cable pulling grips are essential tools for safely and efficiently installing electrical cables, wire ropes, or fiber optics by providing a secure, non-damaging grip during pulling operations. Made from woven steel mesh, these grips tighten around the cable under tension, distributing the pulling force evenly to prevent slippage or cable damage. Their importance lies in enabling controlled pulls across long distances, through conduits, ducts, or underground pathways. For safety, its crucial to select the correct grip type and size for the cable, adhere to load ratings, and inspect the grip for wear, fraying, or broken strands before each use. Improper use or damaged grips can lead to cable failure, injury, or equipment damage during pulling operations.